Autodesk 12812-051462-9011 User Guide 3 - Page 2525

When on and the Use Center flyout > Use Pivot Point Center on page 976 setting is active, each object in a selection set has its own transform gizmo. Size Sets the size of the Transform gizmo as a percentage of the viewport size. Range=1 to 100. Move Gizmo group Relative Size (%) Sets the size of the Move gizmo, relative to the Size value of the Transform gizmo. Range= 0.0 to 500.0. Plane Handles group The plane handles let you constrain object movement along combinations of any two axes. On Toggles the use of plane handles on the Transform gizmo. Size Sets the size of the plane handles, as a percent of the distance from the Offset to the tripod axis. Range=0.0 to 100.0. Offset The percentage of the distance from the gizmo's tripod axis to the outer extent of the Primary axis handles. For example, 0 = no plane handles; 100 = plane handles extend as far as the Primary axis handles. Center Box Handle group The center box can be used as a handle for translations constrained parallel to a viewport. Move in Screen Space Toggles the use of the center box handle. Rotate Gizmo group Relative Size (%) Sets the size of the Rotate gizmo, relative to the Size value of the Transform gizmo. Range= 0.0 to 500.0. Free Rotation Toggles the ability to rotate about any combination of axes. When off, you can rotate only about a specific axis, or, if Screen Handle is on (see following), parallel to the screen. Show Tripod Toggles display of an axis tripod at the pivot point. This tripod also highlights the selected axis while rotating. Screen Handle Toggles display of the screen orbit, which lets you rotate an object parallel to a viewport. 7780 | Chapter 26 Customizing the User Interface