Autodesk 12812-051462-9011 User Guide 3 - Page 1219

3 From the Service list, right-click the Backburner Server item. 4 Choose Properties to display the Properties dialog. 5 On the Log On tab, choose This Account and enter the name of the new user you created for the special user account. If a user account was created on the domain, you would enter [domain name]\[user name] as This Account, or you can browse the domain for the user. 6 In Password and Confirm Password fields, enter the password for the special user account. 7 Click OK to exit the Properties dialog. 8 If the service is started, stop it by right-clicking the item and choosing Stop. 9 Right-click the item and choose Start to restart the service with the newly assigned user. NOTE If you did not turn off "User Must Change Password At Next Logon" when setting up the new account, you will encounter errors. You will need to re-login the newly assigned user so you can first change the password. Once the password is changed, the Backburner Server should start. 10 Close the Services dialog Setting Up Rendering Software When you've configured the computers on your rendering network for TCP/IP, you're ready to load the software. You need to install 3ds Max on each system you plan to use for network rendering. After you've installed 3ds Max on all the systems, at least one of them needs to be authorized. This is the copy of the software that you will run interactively and is used to submit jobs for network rendering. Refer to the Installation Guide for details about installing 3ds Max. NOTE A system using the scanline renderer, that is intended to act a dedicated rendering server, does not require authorization for 3ds Max. 6474 | Chapter 20 Rendering