Autodesk 12812-051462-9011 User Guide 3 - Page 1554

the scanline renderer on page 8116, with the additional options listed below. The resulting scene image has an alpha channel on page 7905. You can use multiple Scene events to show two views of the same scene simultaneously or to cut from one view to another. If you have more than one Scene event in the queue, and they occupy the same time range, composite them with an Image Layer event on page 6824 such as Cross Fade or Simple Wipe. Otherwise, the second Scene Event overwrites the first even though your system has spent the time processing both events. Procedures To add a Scene event: 1 Make sure no events are selected in the queue. 2 Click Add Scene. An Add Scene Event dialog appears. 3 Choose a view to use from the View list. 4 Click Render Setup to change rendering settings from the way you have set them in the Render Setup dialog. NOTE Unlike settings in the Execute Video Post dialog, changes you make to the Scene event rendering options change the Render Setup dialog settings, and vice-versa. 5 Set the Scene Range options and click OK. The Scene event appears at the end of the queue. To match the scene's frames with Video Post frames: ■ Make sure Lock To Video Post Range is selected. Lock To Video Post Range is the default. Frames in the scene match Video Post frames and have the same frame number. That is, frame 0 in the scene is frame 0 in the Video Post dialog, frame 15 in the scene is frame 15 in Video Post, and so on. The range bar for the Scene event represents which portion of the scene is selected. If the range bar covers Video Post frames 25 to 35, executing the queue renders scene frames 25 to 35. Moving the range bar for the scene is like moving a time window within the scene. Other Scene Range options are disabled when Lock To Video Post Range is selected. Add Scene Event | 6809