Netgear GSM4328PB CLI Manual Software Version 12.x - Page 976
control-plane, option might not be available.
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 976 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Note: The control-plane keyword is available only in Global Config mode. Note: Depending on the platform, the out option might not be available. Default Format Modes none ip access-group {accesslistnumber | name} {{control-plane| in | out} | vlan vlan-id {in | out}} [sequence 1-4294967295] Interface Config Global Config Parameter Description accesslistnumber Identifies a specific IP ACL. The range is 1 to 199. name The name of the Access Control List. vlan-id A VLAN ID associated with a specific IP ACL in a given direction. sequence A optional sequence number that indicates the order of this IP access list relative to the other IP access lists already assigned to this interface and direction. The range is 1 to 4294967295. (NETGEAR Switch) (Config)#ip access-group ip1 control-plane no ip access-group This command removes a specified IP ACL from an interface. Default Format Mode none no ip access-group {accesslistnumber | name} {{control-plane | in | out}| vlan vlan-id {in | out}} Interface Config Global Config Command example: (NETGEAR Switch)(Config)#no ip access-group ip1 control-plane Quality of Service Commands 976 CLI Command Reference Manual