Netgear GSM4328PB CLI Manual Software Version 12.x - Page 74
transport output telnet, session-limit
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no transport input telnet Use this command to prevent new Telnet sessions from being established. Format Mode no transport input telnet Line Config transport output telnet This command regulates new outbound Telnet connections. If enabled, new outbound Telnet sessions can be established until the system reaches the maximum number of simultaneous outbound Telnet sessions allowed. An established session remains active until the session is ended or an abnormal network error ends it. Default Format Mode enabled transport output telnet Line Config no transport output telnet Use this command to prevent new outbound Telnet connection from being established. Format Mode no transport output telnet Line Config session-limit This command specifies the maximum number of simultaneous outbound Telnet sessions. The number argument can be a number in the range from 0-5. A value of 0 indicates that no outbound Telnet session can be established. Default Format Mode 5 session-limit number Line Config no session-limit This command sets the maximum number of simultaneous outbound Telnet sessions to the default value. Format Mode no session-limit Line Config Management Commands 74 CLI Command Reference Manual