Netgear GSM4328PB CLI Manual Software Version 12.x - Page 725
area stub OSPF, area stub no-summary OSPF, area virtual-link OSPF
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 725 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches (NETGEAR Switch) (Config-router)#no area 1 range 10.0.0.0 255.0.0.0 summarylink cost area stub (OSPF) This command creates a stub area for the specified area ID. A stub area is characterized by the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs and Summary LSAs can significantly reduce the link state database of routers within the stub area. Format Mode area area-id stub Router OSPF Config no area stub This command deletes a stub area for the specified area ID. Format Mode no area area-id stub Router OSPF Config area stub no-summary (OSPF) This command configures the Summary LSA mode for the stub area identified by area-id. Use this command to prevent LSA Summaries from being sent. Default Format Mode disabled area area-id stub no-summary Router OSPF Config no area stub no-summary This command configures the default Summary LSA mode for the stub area identified by area-id. Format Mode no area area-id stub no-summary Router OSPF Config area virtual-link (OSPF) This command creates the OSPF virtual interface for the specified area-id and neighbor. The neighbor parameter is the Router ID of the neighbor. Format Mode area area-id virtual-link neighbor Router OSPF Config Routing Commands 725 CLI Command Reference Manual