Netgear GSM4328PB CLI Manual Software Version 12.x - Page 170
show openflow installed flows, This command displays the list of con d flows on the switch.
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition IP Address The IPv4 address of the controller. IP Port The IPv4 port number on the switch for the controller connection. Connection Mode The SSL or TCP Controller Connection mode. Role The role of the controller: Master, Equal, or Slave Command example: (NETGEAR Switch) #show openflow configured controller IP Address IP Port Connection Mode Role 172.21.4.217 6633 SSL Master show openflow installed flows This command displays the list of configured flows on the switch. Format Mode show openflow installed flows [dest_ip ip-address | dest_ip_port 1-65535 | dest_mac macaddr | dscp 0-63 | ether_type 0-0xFFFF | ingress_port slot/port | ip_proto 0-255 | priority 1-65535 | source_ip ip-address | source_ip_port 1-65535 | source_mac macaddr | table {4 | 24 | 25 | 60} | vlan 1-4093 | vlan_prio 0-7] Privileged Exec Paramater dest_ip dest_ip_port dest_mac dscp ether_type ingress_port ip_proto priority source_ip source_ip_port source_mac table Definition The IP address of the destination. The port number of the destination in the range 1-65535. The MAC address of the destination. The DSCP value in the range 0-63. The EtherType value in the range 0-0xFFFF. The slot and port for the incoming traffic. The IP protocol in the range 0-255. The priority of the flow. This is a value in the range 1-65535. The IP address of the source. The port number of the source in the range 1-65535. The MAC address of the source. The table number, which can be 4, 24, 25, or 60. Management Commands 170 CLI Command Reference Manual