Netgear GSM4328PB CLI Manual Software Version 12.x - Page 64
The following example displays output for the service port
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition IPv6 Administrative Mode Whether enabled or disabled. Default value is enabled. IPv6 Address/Length The IPv6 address and length. Default is Link Local format. IPv6 Default Router TheIPv6 default router address on the service port. The factory default value is an unspecified address. Configured IPv4 Protocol The IPv4 network protocol being used. The options are bootp | dhcp | none. Configured IPv6 Protocol The IPv6 network protocol being used. The options are dhcp | none. DHCPv6 Client DUID The DHCPv6 client's unique client identifier. This row is displayed only when the configured IPv6 protocol is dhcp. IPv6 Autoconfig Mode Whether IPv6 Stateless address autoconfiguration is enabled or disabled. Burned in MAC Address The burned in MAC address used for in-band connectivity. DHCP Client Identifier The client identifier is displayed in the output of the command only if DHCP is enabled with the client-id option on the service port. Command example: The following example displays output for the service port: (Netgear switch) #show serviceport Interface Status Up IP Address 10.230.3.51 Subnet Mask 255.255.255.0 Default Gateway 10.230.3.1 IPv6 Administrative Mode Enabled IPv6 Prefix is fe80::210:18ff:fe82:640/64 IPv6 Prefix is 2005::21/128 IPv6 Default Router is fe80::204:76ff:fe73:423a Configured IPv4 Protocol DHCP Configured IPv6 Protocol DHCP DHCPv6 Client DUID 00:03:00:06:00:10:18:82:06:4C IPv6 Autoconfig Mode Disabled Burned In MAC Address 00:10:18:82:06:4D DHCP Client Identifier 0NETGEAR-0010.1882.160C Management Commands 64 CLI Command Reference Manual