Netgear GSM4328PB CLI Manual Software Version 12.x - Page 555
mvr group, mvr mode, no mvr
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 555 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no mvr This command disables MVR. Format Mode no mvr Global Config Interface Config mvr group This command adds an MVR membership group. A.B.C.D is the IP multicast group being added. The count is the number of incremental multicast groups being added (the first multicast group is A.B.C.D). If a count is not specified, only one multicast group is added. Format Mode mvr group A.B.C.D [count] Global Config no mvr group This command removes the MVR membership group. Format Mode no mvr group A.B.C.D [count] Global Config mvr mode This command changes the MVR mode type. If the mode is set to compatible, the switch does not learn multicast groups; they need to be configured by the operator as the protocol does not forward joins from the hosts to the router. To operate in this mode, the IGMP router needs to be statically configured to transmit all required multicast streams to the MVR switch. If the mode is set to dynamic, the switch learns existing multicast groups by snooping the IGMP queries from the router on source ports and forwarding the IGMP joins from the hosts to the IGMP router on the multicast VLAN (with appropriate translation of the VLAN ID). Default Format Mode Compatible mvr mode {compatible | dynamic} Global Config Switching Commands 555 CLI Command Reference Manual