Netgear GSM4328PB CLI Manual Software Version 12.x - Page 664
ip route net-prototype, ip netdirbcast, no ip route distance
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 664 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip route distance This command sets the default static route preference value in the router. Lower route preference values are preferred when determining the best route. Format Mode no ip route distance Global Config ip route net-prototype This command adds net prototype IPv4 routes to the hardware. Format Mode ip route net-prototype prefix/prefix-length nexthopip num-routes Global Config Parameter prefix/prefix-length nexthopip num-routes Definition The destination network and mask for the route. The next-hop IP address, which must belong to an active routing interface but does not need to be resolved. The number of routes that must be added to the hardware starting from the specified prefix argument and within the specified prefix length. no ip route net-prototype This command deletes all the net prototype IPv4 routes that were added to the hardware. Format Mode no ip route net-prototype Global Config ip netdirbcast This command enables the forwarding of network-directed broadcasts on an interface or range of interfaces. When enabled, network directed broadcasts are forwarded. When disabled they are dropped. Default Format Mode disabled ip netdirbcast Interface Config Routing Commands 664 CLI Command Reference Manual