Netgear GSM4328PB CLI Manual Software Version 12.x - Page 566
set igmp mcrtrexpiretime, set igmp mrouter, no set igmp maxresponse
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 566 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no set igmp maxresponse This command sets the max response time (on the interface or VLAN) to the default value. Format Mode no set igmp maxresponse [vlan-id] Global Config Interface Config VLAN Config set igmp mcrtrexpiretime This command sets the multicast router present expiration time. The time is set for the system, on a particular interface or VLAN, or on a range of interfaces. This is the amount of time in seconds that a switch waits for a query to be received on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite time-out, that is, no expiration. Default Format Mode 0 set igmp mcrtrexpiretime [vlan-id] seconds Global Config Interface Config VLAN Config no set igmp mcrtrexpiretime This command sets the multicast router present expiration time to 0. The time is set for the system, on a particular interface or a VLAN. Format Mode no set igmp mcrtrexpiretime [vlan-id] Global Config Interface Config VLAN Config set igmp mrouter This command configures the VLAN ID that has the multicast router mode enabled. Format Mode set igmp mrouter vlan-id Interface Config Switching Commands 566 CLI Command Reference Manual