Netgear GSM4328PB CLI Manual Software Version 12.x - Page 606
current LLDP data to the system. You can show information about LLDP remote data
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 606 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Last Update The amount of time since the last update to the remote table in days, hours, minutes, and seconds. Total Inserts Total number of inserts to the remote data table. Total Deletes Total number of deletes from the remote data table. Total Drops Total number of times the complete remote data received was not inserted due to insufficient resources. Total Ageouts Total number of times a complete remote data entry was deleted because the Time to Live interval expired. The table contains the following column headings. Term Interface TX Total RX Total Discards Errors Ageouts TVL Discards TVL Unknowns TLV MED TLV 802.1 TLV 802.3 Definition The interface in unit/slot/port format. Total number of LLDP packets transmitted on the port. Total number of LLDP packets received on the port. Total number of LLDP frames discarded on the port for any reason. The number of invalid LLDP frames received on the port. Total number of times a complete remote data entry was deleted for the port because the Time to Live interval expired. The number of TLVs discarded. Total number of LLDP TLVs received on the port where the type value is in the reserved range, and not recognized. The total number of LLDP-MED TLVs received on the interface. The total number of LLDP TLVs received on the interface which are of type 802.1. The total number of LLDP TLVs received on the interface which are of type 802.3. show lldp remote-device Use this command to display summary information about remote devices that transmit current LLDP data to the system. You can show information about LLDP remote data received on all ports or on a specific port. Format Mode show lldp remote-device {unit/slot/port | all} Privileged EXEC Switching Commands 606 CLI Command Reference Manual