Netgear GSM4328PB CLI Manual Software Version 12.x - Page 789
show captive-portal, no authentication timeout
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 789 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode 300 authentication timeout seconds Captive Portal Config no authentication timeout This command sets the authentication timeout to the default value. Format Mode no authentication timeout Captive Portal Config show captive-portal This command reports status of the captive portal feature. Format Mode show captive-portal Privileged EXEC Term Description Administrative Mode Shows whether the CP is enabled. Operational Status Indicates whether the CP operational status is enabled or disabled. Disable Reason If CP is disabled, this field displays the reason, which can be None, Administratively Disabled, No IPv4 Address, or Routing Enabled, but no IPv4 routing interface. Captive Portal IP Shows the IP address that the captive portal feature uses. Address show captive-portal status This command reports status of all captive portal instances in the system. Format Mode show captive-portal status Privileged EXEC Term Additional HTTP Port Additional HTTP Secure Port Description Displays the port number of the additional HTTP port configured for traffic. A value of 0 indicates that only port 80 is configured for HTTP traffic. Displays the port number of the additional HTTPS secure port. A value of 0 indicates no additional port and the default port (443) is used. Captive Portal Commands 789 CLI Command Reference Manual