Netgear GSM4328PB CLI Manual Software Version 12.x - Page 343
Remote Monitoring Commands
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Remote Monitoring Commands Remote Monitoring (RMON) is a method of collecting a variety of data about network traffic. RMON supports 64-bit counters (RFC 3273) and High Capacity Alarm Table (RFC 3434). Note: There is no configuration command for ether stats and high capacity ether stats. The data source for ether stats and high capacity ether stats are configured during initialization.rmon alarm rmon alarm This command sets the RMON alarm entry in the RMON alarm MIB group. Format Mode rmon alarm alarm-number variable sample-interval {absolute | delta} rising-threshold value [rising-event-index] falling-threshold value [falling-event-index] [startup {rising | falling | rising-falling}] [owner string] Global Config Parameter Description Alarm Index An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample at a particular interval for an object on the device. The range is 1 to 65535. Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of integer. Alarm Interval The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. The range is 1 to 2147483647. The default is 1. Alarm Absolute Value The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed value. Alarm Rising Threshold The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1. Alarm Rising Event The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535. Index The default is 1. Alarm Falling Threshold The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1. Alarm Falling Event The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535. Index The default is 2. Alarm Startup Alarm The alarm that may be sent. Possible values are rising, falling or both rising-falling. The default is rising-falling. Alarm Owner The owner string associated with the alarm entry. The default is monitorAlarm. Utility Commands 343 CLI Command Reference Manual