Netgear GSM4328PB CLI Manual Software Version 12.x - Page 599
port-security violation shutdown, show port-security, parameter
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 599 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches port-security violation shutdown This command allows an interface to be diagnostically disabled when a violation occurs for port MAC locking. Format Mode port-security violation shutdown Interface Config no port-security violation shutdown This command prevents an interface from being diagnostically disabled when a violation occurs for port MAC locking. Format Mode no port-security violation shutdown Interface Config show port-security This command displays the port-security settings for the port or ports. If you do not use a parameter, the command displays the Port Security Administrative mode. Use the optional parameters to display the settings on a specific interface or on all interfaces. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. Format Mode show port-security [unit/slot/port | all] Privileged EXEC Term Admin Mode Definition Port Locking mode for the entire system. This field displays if you do not supply any parameters. For each interface, or for the interface you specify, the following information displays. Term Admin Mode Dynamic Limit Static Limit Violation Trap Mode Sticky Mode Definition Port Locking mode for the Interface. Maximum dynamically allocated MAC Addresses. Maximum statically allocated MAC Addresses. Whether violation traps are enabled. The administrative mode of the port security Sticky Mode feature on the interface. Switching Commands 599 CLI Command Reference Manual