Netgear GSM4328PB CLI Manual Software Version 12.x - Page 823
ipv6 address autoconfig, eui-64
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 823 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The hexadecimal letters in the IPv6 addresses are not case-sensitive. An example of an IPv6 prefix and prefix length is 3ffe:1::1234/64. The optional eui-64 field designates that IPv6 processing on the interfaces was enabled using an EUI-64 interface ID in the low order 64 bits of the address. If you use this option, the value of prefix_length must be 64 bits. Format Mode ipv6 address prefix/prefix_length [eui64] Interface Config no ipv6 address Use this command to remove all IPv6 addresses on an interface or specified IPv6 address. The prefix parameter consists of the bits of the address to be configured. The prefix_length designates how many of the high-order contiguous bits of the address comprise the prefix.The optional eui-64 field designates that IPv6 processing on the interfaces was enabled using an EUI-64 interface ID in the low order 64 bits of the address. If you do not supply any parameters, the command deletes all the IPv6 addresses on an interface. Format Mode no ipv6 address [prefix/prefix_length] [eui64] Interface Config ipv6 address autoconfig Use this command to allow an in-band interface to acquire an IPv6 address through IPv6 Neighbor Discovery Protocol (NDP) and through the use of Router Advertisement messages. Default Format Mode disabled ipv6 address autoconfig Interface Config no ipv6 address autoconfig This command the IPv6 autoconfiguration status on an interface to the default value. Format Mode no ipv6 address autoconfig Interface Config IPv6 Commands 823 CLI Command Reference Manual