Netgear GSM4328PB CLI Manual Software Version 12.x - Page 908
show ipv6 dhcp binding, If you use the statistics parameter
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 908 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches If you specify an interface, you can use the optional statistics parameter to view statistics for the specified interface. Format Mode show ipv6 dhcp interface {unit/slot/port | vlan vlan-id} [statistics] Privileged EXEC Term IPv6 Interface Mode Definition The interface name in unit/slot/port format. Shows whether the interface is a IPv6 DHCP relay or server. If the interface mode is server, the following information displays. Term Definition Pool Name The pool name specifying information for DHCPv6 server distribution to DHCPv6 clients. Server Preference The preference of the server. Option Flags Shows whether rapid commit is enabled. If the interface mode is relay, the following information displays. Term Relay Address Relay Interface Number Relay Remote ID Option Flags Definition The IPv6 address of the relay server. The relay server interface in unit/slot/port format. If configured, shows the name of the relay remote. Shows whether rapid commit is configured. If you use the statistics parameter, the command displays the IPv6 DHCP statistics for the specified interface. See show ipv6 dhcp statistics on page 907 for information about the output. show ipv6 dhcp binding This command displays configured DHCP pool. Format Mode show ipv6 dhcp binding [ipv6-address] Privileged EXEC IPv6 Commands 908 CLI Command Reference Manual