Netgear GSM4328PB CLI Manual Software Version 12.x - Page 595
set mld proxy-querier, show mldsnooping proxy-querier
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 595 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches When the optional detail keyword is used, the command shows the global information and the information for all Querier-enabled VLANs. set mld proxy-querier If a non-querier switch receives an MLD leave message, the non-querier switch can send queries with 0::0 as the source IP addresses. This command enables the switch to send such proxy queries through different command modes the following ways: • in Global Config mode, on the entire switch • in Interface Config mode, on an interface • in VLAN Config mode, on a particular VLAN and all interfaces participating in the VLAN. By default, the proxy-querier is enabled. Default Format Mode enabled set mld proxy-querier [vlan-id] Global Config Interface Config VLAN Config no set mld proxy-querier This command stops the switch from sending proxy queries through different command modes in the following ways: • in Global Config mode, on the entire switch • in Interface Config mode, on an interface • in VLAN Config mode, on a particular VLAN and all interfaces participating in the VLAN. This command is specific to MLD. Format Mode no set mld proxy-querier [vlan-id] Global Config Interface Config VLAN Config show mldsnooping proxy-querier This command shows the global admin mode of the MLD snooping proxy-querier and the interface on which it is enabled. Format Mode show mldsnooping proxy-querier Privileged EXEC Switching Commands 595 CLI Command Reference Manual