Netgear GSM4328PB CLI Manual Software Version 12.x - Page 224
logging buffered threshold, logging cli-command, logging console, logging buffered wrap
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches logging buffered threshold This command sets the percentage (from 1 to 100 percent) of log space. If logging exceeds the threshold percentage, a console log is generated, and, if configured, an alert email is generated. The threshold configuration applies only if the logging buffered wrap command is disabled. The default action for the memory log is to wrap. The threshold does not apply to that default action. Default Format Mode enabled logging buffered threshold percentage-range Global Config Parameter percentage-range Definition Sets the percentage of log space that, if exceeded, causing logging to stop. The range is from 1 to 100 percent. The default is 80 percent. logging cli-command This command enables the CLI command logging feature, which enables the switch to log all CLI commands issued on the switch. Default Format Mode enabled logging cli-command Global Config no logging cli-command This command disables the CLI command Logging feature. Format Mode no logging cli-command Global Config logging console This command enables logging to the console. You can specify the severitylevel value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode disabled; error (3) when enabled logging console [severitylevel] Global Config Utility Commands 224 CLI Command Reference Manual