Netgear GSM4328PB CLI Manual Software Version 12.x - Page 221
environment temprange, environment set fan quiet, on any other switches.
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches environment temprange Use this command to set the allowed temperature range for normal operation. Format Mode environment temprange min temperature max temperature Global Config Parameter Definition min temperature Sets the minimum allowed temperature for normal operation. The range is between - 100°C and 100°C. The default is 0°C. max temperature Sets the maximum allowed temperature for normal operation. The range is between - 100°C and 100°C. The default is 0°C. environment trap Use this command to configure environment status traps. Format Mode environment trap {fan | powersupply | temperature} Global Config Parameter fan powersupply temperature Definition Enables or disables the sending of traps for fan status events. The default is enable. Enables or disables the sending of traps for power supply status events. The default is enable. Enables or disables the sending of traps for temperature status events. The default is enable. environment set fan quiet Use this command to stop the fan on an M4300-8X8F switch. This command is not supported on any other switches. Default Format Mode enabled environment set fan quiet Global Config no environment set fan quiet Use this command to start the fan on an M4300-8X8F switch. This command is not supported on any other switches. Format Mode no environment set fan quiet Global Config Utility Commands 221 CLI Command Reference Manual