Netgear GSM4328PB CLI Manual Software Version 12.x - Page 587
set mld-plus, show mldsnooping, set mld, set mld exclude-mrouter-intf, set mld fast-leave
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 587 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches set mld-plus vlan After you enable the set mld-plus command, you can enable the set mld-plus vlan command to enable all of the following global MLD Snooping configuration commands at the VLAN level for a particular VLAN: • set mld vlan • set mld exclude-mrouter-intf vlan • set mld fast-leave vlan The vlan argument in the set mld-plus vlan command can be a VLAN from 1 to 4093. Default Format Mode Enabled for VLAN 1 set mld-plus vlan VLAN Config no set mld-plus vlan This command disables all of the following global MLD Snooping configuration commands at the VLAN level for a particular VLAN: • set mld vlan • set mld exclude-mrouter-intf vlan • set mld fast-leave vlan The vlan argument in the no set mld-plus vlan command can be a VLAN from 1 to 4093. Format Mode no set mld-plus vlan VLAN Config show mldsnooping Use this command to display MLD Snooping information. Configured information is displayed whether or not MLD Snooping is enabled. Format Mode show mldsnooping [unit/slot/port | vlan-id] Privileged EXEC When the optional arguments unit/slot/port or vlan-id are not used, the command displays the following information. Term Definition Admin Mode Indicates whether or not MLD Snooping is active on the switch. Interfaces Enabled Interfaces on which MLD Snooping is enabled. for MLD Snooping Switching Commands 587 CLI Command Reference Manual