Netgear GSM4328PB CLI Manual Software Version 12.x - Page 328
show sflow agent, show sflow pollers, no sflow source-interface
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter tunnel-id vlan-id Description Configures the tunnel interface to use as the source IP address. The range of the tunnel ID is 0 to 7. Configures the VLAN interface to use as the source IP address. The range of the VLAN ID is 1 to 4093. no sflow source-interface Use this command to reset the sFlow source interface to the default settings. Format Mode no sflow source-interface Global Config show sflow agent The sFlow agent collects time-based sampling of network interface statistics and flow-based samples. These are sent to the configured sFlow receivers. Use this command to display the sFlow agent information. Format Mode show sflow agent Privileged EXEC Field sFlow Version IP Address Description Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: MIB Version; Organization; Software Revision where: MIB Version: 1.3, the version of this MIB. Organization: NETGEAR Corp. Revision: 1.0 The IP address associated with this agent. Command example: (NETGEAR Switch) #show sflow agent sFlow Version 1.3;NETGEAR Corp;1.0 IP Address 10.131.12.66 show sflow pollers Use this command to display the sFlow polling instances created on the switch. Use "-" for range. Format Mode show sflow pollers Privileged EXEC Utility Commands 328 CLI Command Reference Manual