Netgear GSM4328PB CLI Manual Software Version 12.x - Page 961
control-plane, remark
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 961 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Note: The control-plane keyword is available only in Global Config mode. Note: Depending on the platform, the out option might not be available. Format Modes mac access-group name {{control-plane | in | out} vlan vlan-id {in | out}} [sequence 1-4294967295] Global Config Interface Config Parameter name vlan-id sequence Description The name of the Access Control List. A VLAN ID associated with a specific IP ACL in a given direction. A optional sequence number that indicates the order of this IP access list relative to the other IP access lists already assigned to this interface and direction. The range is 1 to 4294967295. (NETGEAR Switch)(Config)#mac access-group mac1 control-plane no mac access-group This command removes a MAC ACL identified by name from the interface in a given direction. Format Modes no mac access-group name {{control-plane | in | out} vlan vlan-id {in | out}} Global Config Interface Config Command example: (NETGEAR Switch)(Config)#no mac access-group mac1 control-plane remark This command adds a new comment to an ACL rule. Use the remark keyword to add comments (remarks) to an ACL rule entry that belongs to an IPv4, IPv6, MAC, or ARP ACL. You can add up to 10 * (maximum number of ACL rules per list) remarks per ACL and up to 10 remarks per ACL rule. For all QoS ACLs (IPv4, IPv6, and MAC ACLs) together, you can up to add 2 * (maximum number of ACL rules). Quality of Service Commands 961 CLI Command Reference Manual