Netgear GSM4328PB CLI Manual Software Version 12.x - Page 1052
show ip igmp-proxy interface
View all Netgear GSM4328PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1052 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Older Version 2 Querier Timeout The interval used to timeout the older version 2 queriers. Proxy Start Frequency The number of times the IGMP Proxy has been stopped and started. Command example: (NETGEAR Switch) #show ip igmp-proxy Interface Index 1/0/1 Admin Mode Enable Operational Mode Enable Version 3 Num of Multicast Groups 0 Unsolicited Report Interval 1 Querier IP Address on Proxy Interface........ 5.5.5.50 Older Version 1 Querier Timeout 0 Older Version 2 Querier Timeout 00::00:00 Proxy Start Frequency 1 show ip igmp-proxy interface This command displays a detailed list of the host interface status parameters. It displays the following parameters only when you enable IGMP Proxy. Format Modes show ip igmp-proxy interface Privileged EXEC User EXEC Term Interface Index Definition The unit/slot/port of the IGMP proxy. The column headings of the table associated with the interface are as follows. Term Ver Query Rcvd Report Rcvd Report Sent Definition The IGMP version. Number of IGMP queries received. Number of IGMP reports received. Number of IGMP reports sent. IP Multicast Commands 1052 CLI Command Reference Manual