Netgear XSM4324S CLI Manual Software Version 12.x - Page 87
ip https authentication, radius
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description local Uses the local username database for authentication. none Uses no authentication. radius Uses the list of all RADIUS servers for authentication. tacacs Uses the list of all TACACS+ servers for authentication. Command example: The following example configures http authentication: (NETGEAR Switch)(config)# ip http authentication radius local no ip http authentication Use this command to return to the default. Format Mode no ip http authentication Global Config ip https authentication Use this command to specify authentication methods for https server users. The default configuration is the local user database is checked. This action has the same effect as the command ip https authentication local. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. For example, if none is specified as an authentication method after radius, no authentication is used if the RADIUS server is down. Default Format Mode local ip https authentication method1 [method2...] Global Config Parameter local none radius tacacs Description Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS+ servers for authentication. Management Commands 87 CLI Command Reference Manual