Netgear XSM4324S CLI Manual Software Version 12.x - Page 516
port-channel min-links, port-channel name, port-channel system priority, show lacp actor
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches port-channel min-links This command configures the port-channel's minimum links for lag interfaces. The number parameter can be in the range 1-8. The default is 1. Default Format Mode 1 port-channel min-links number Interface Config port-channel name This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port for a configured port-channel, and name is an alphanumeric string up to 15 characters. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. Format Mode port-channel name {logical unit/slot/port} name Global Config port-channel system priority Use this command to configure port-channel system priority. The valid range of priority is 0-65535. Default Format Mode 0x8000 port-channel system priority priority Global Config no port-channel system priority Use this command to configure the default port-channel system priority value. Format Mode no port-channel system priority Global Config show lacp actor Use this command to display LACP actor attributes. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port number. Format Mode show lacp actor {unit/slot/port | all} Global Config Switching Commands 516 CLI Command Reference Manual