Netgear XSM4324S CLI Manual Software Version 12.x - Page 787
snmp-server enable traps captive-portal, trapflags
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 787 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no http port This command removes the specified additional HTTP port. Format Mode no http port port-number Captive Portal Config https port This command configures an additional HTTPS secure port. The HTTPS secure port default is 0 which denotes no additional port and the default port (443) is used. Port number 80 is reserved. Default Format Mode 0 https port port-number Captive Portal Config Parameter port-num Description Port number in the range of 0-65535. Command example: (NETGEAR Switch) (Config-CP) #https port 60000 (NETGEAR Switch) (Config-CP) #no https port no https port This command set the HTTPS secure port to the default. Format Mode no https port port-number Captive Portal Config snmp-server enable traps captive-portal This command globally enables the captive portal traps. The specific captive portal traps are configured using the trapflags command in Captive Portal Config Mode. Default Format Mode Disable snmp-server enable traps captive-portal Global Config Captive Portal Commands 787 CLI Command Reference Manual