Netgear XSM4324S CLI Manual Software Version 12.x - Page 438
switchport mode private-vlan
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 438 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description host-association Defines the VLAN association for community or host ports. mapping Defines the private VLAN mapping for promiscuous ports. primary-vlan-id Primary VLAN ID of a private VLAN. secondary-vlan-id Secondary (isolated or community) VLAN ID of a private VLAN. add Associates the secondary VLAN with the primary one. remove Deletes the secondary VLANs from the primary VLAN association. secondary-vlan-list A list of secondary VLANs to be mapped to a primary VLAN. no switchport private-vlan This command removes the private-VLAN association or mapping from the port. Format Mode no switchport private-vlan {host-association | mapping} Interface Config switchport mode private-vlan This command configures a port as a promiscuous or host private VLAN port. Note that the properties of each mode can be configured even when the switch is not in that mode. However, they will only be applicable once the switch is in that particular mode. Format Mode switchport mode private-vlan {host | promiscuous} Interface Config Parameter host promiscuous Description Configures an interface as a private VLAN host port. It can be either isolated or community port depending on the secondary VLAN it is associated with. Configures an interface as a private VLAN promiscuous port. The promiscuous ports are members of the primary VLAN. no switchport mode private-vlan This command removes the private-VLAN association or mapping from the port. Format Mode no switchport mode private-vlan Interface Config Switching Commands 438 CLI Command Reference Manual