Netgear XSM4324S CLI Manual Software Version 12.x - Page 752
OSPF Show Commands, clear ip ospf stub-router, show ip ospf
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 752 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter summary-lsa metric Description (Optional) Set the metric in type 3 and type 4 summary LSAs to LsInfinity (0xFFFFFF). (Optional) Metric to send in summary LSAs when in stub router mode. The range is 1 to 16,777,215. The default is 16,711,680 (0xFF0000). no max-metric router-lsa Use this command in OSPFv2 Router Configuration mode to disable stub router mode. The command clears either type of stub router mode (always or on-startup) and resets the summary-lsa option. If OSPF is configured to enter global configuration mode on startup, and during normal operation you want to immediately place OSPF in stub router mode, issue the no max-metric router-lsa on-startup command. The no max-metric router-lsa summary-lsa command causes OSPF to send summary LSAs with metrics computed using normal procedures defined in RFC 2328. Format Mode no max-metric router-lsa [on-startup] [summary-lsa] OSPFv2 Router Configuration clear ip ospf stub-router Use the clear ip ospf stub-router command in Privileged EXEC mode to force OSPF to exit stub router mode when it has automatically entered stub router mode because of a resource limitation. OSPF only exits stub router mode if it entered stub router mode because of a resource limitation or it if is in stub router mode at startup. If OSPF is configured to function permanently in stub router mode, the command does not take effect. Format Mode clear ip ospf stub-router Privileged EXEC OSPF Show Commands show ip ospf This command displays information relevant to the OSPF router. Format Mode show ip ospf Privileged EXEC Routing Commands 752 CLI Command Reference Manual