Netgear XSM4324S CLI Manual Software Version 12.x - Page 1013
ip multicast, ip multicast ttl-threshold, dropped. The value
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1013 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ip multicast This command sets the administrative mode of the IP multicast forwarder in the router to active. Default Format Mode disabled ip multicast Global Config no ip multicast This command sets the administrative mode of the IP multicast forwarder in the router to inactive. Format Mode no ip multicast Global Config ip multicast ttl-threshold This command is specific to IPv4. Use this command to apply the given Time-to-Live threshold value to a routing interface or range of interfaces. The ttlvalue is the TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the interface. This command sets the Time-to-Live threshold value such that any data packets forwarded over the interface having TTL value above the configured value are dropped. The value for ttlvalue ranges from 0 to 255. Default Format Mode 1 ip multicast ttl-threshold ttlvalue Interface Config no ip multicast ttl-threshold This command applies the default TTL threshold to a routing interface. The TTL threshold is the TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the interface. Format Mode no ip multicast ttl-threshold Interface Config IP Multicast Commands 1013 CLI Command Reference Manual