Netgear XSM4324S CLI Manual Software Version 12.x - Page 271
ip dhcp conflict logging, clear ip dhcp binding, clear ip dhcp server statistics
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ip dhcp conflict logging This command enables conflict logging on DHCP server. Default Format Mode enabled ip dhcp conflict logging Global Config no ip dhcp conflict logging This command disables conflict logging on DHCP server. Format Mode no ip dhcp conflict logging Global Config clear ip dhcp binding This command deletes an automatic address binding from the DHCP server database. If * (the asterisk character) is specified, the bindings corresponding to all the addresses are deleted. address is a valid IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format Mode clear ip dhcp binding {address | *} Privileged EXEC clear ip dhcp server statistics This command clears DHCP server statistics counters. Format Mode clear ip dhcp server statistics Privileged EXEC clear ip dhcp conflict The command is used to clear an address conflict from the DHCP Server database. The server detects conflicts using a ping. DHCP server clears all conflicts If * (the asterisk character) is used as the address parameter. Default Format Mode none clear ip dhcp conflict {address | *} Privileged EXEC Utility Commands 271 CLI Command Reference Manual