Netgear XSM4324S CLI Manual Software Version 12.x - Page 483
storm-control broadcast rate
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode 5 storm-control broadcast level threshold Global Config Interface Config no storm-control broadcast level This command sets the broadcast storm recovery threshold to the default value for all interfaces (Global Config mode) or one or more interfaces (Interface Config mode) and disables broadcast storm recovery. Format Mode no storm-control broadcast level Global Config Interface Config storm-control broadcast rate Use this command to configure the broadcast storm recovery threshold for all interfaces (Global Config mode) or one or more interfaces (Interface Config mode) in packets per second. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface increases beyond the configured threshold, the traffic is dropped. Therefore, the rate of broadcast traffic is limited to the configured threshold. The threshold rate can be in the range from 0-14880000. The default is 0. Default Format Mode 0 storm-control broadcast rate threshold Global Config Interface Config no storm-control broadcast rate This command sets the broadcast storm recovery threshold to the default value for all interfaces (Global Config mode) or one or more interfaces (Interface Config mode) and disables broadcast storm recovery. Format Mode no storm-control broadcast rate Global Config Interface Config Switching Commands 483 CLI Command Reference Manual