Netgear XSM4324S CLI Manual Software Version 12.x - Page 387
spanning-tree forward-time, spanning-tree guard
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no spanning-tree edgeport This command specifies that this port is not an Edge Port within the common and internal spanning tree. Format Mode no spanning-tree edgeport Interface Config spanning-tree forward-time This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1". Default Format Mode 15 spanning-tree forward-time value Global Config no spanning-tree forward-time This command sets the Bridge Forward Delay parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree forward-time Global Config spanning-tree guard This command selects whether loop guard or root guard is enabled on an interface or range of interfaces. If neither is enabled, then the port operates in accordance with the multiple spanning tree protocol. Default Format Mode none spanning-tree guard {none | root | loop} Interface Config no spanning-tree guard This command disables loop guard or root guard on the interface. Format Mode no spanning-tree guard Interface Config Switching Commands 387 CLI Command Reference Manual