Netgear XSM4324S CLI Manual Software Version 12.x - Page 346
rmon event, no rmon hcalarm
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no rmon hcalarm This command deletes the rmon hcalarm entry. Format Mode no rmon hcalarm alarm-number Global Config Command example: (NETGEAR Switch) (Config)# no rmon hcalarm 1 rmon event This command sets the RMON event entry in the RMON event MIB group. Format Mode rmon event event-number [description string | log | owner string | trap community] Global Config Parameter Event number Description Log Owner Community Description An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. The range is 1 to 65535. A comment describing the event entry. The default is alarmEvent. Creates a log entry. The owner string that is associated with the entry. The default is monitorEvent. The SNMP community, which is specified by an octet string that is used to send an SNMP trap. The default is public. Command example: (NETGEAR Switch) (Config)# rmon event 1 log description test no rmon event This command deletes the rmon event entry. Format Mode no rmon event event-number Global Config Command example: (NETGEAR Switch) (Config)# no rmon event 1 Utility Commands 346 CLI Command Reference Manual