Netgear XSM4324S CLI Manual Software Version 12.x - Page 1028
ip pim dr-priority, ip pim join-prune-interval, router DR.
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1028 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches ip pim dr-priority Use this command to set the priority value for which a router is elected as the designated router (DR). The priority argument is a value in the range of 0-2147483647. Note: This command takes effect only when Sparse mode is enabled in the Global mode. Default 1 Format Mode ip pim dr-priority priority Interface Config Command example: (NETGEAR) (Interface 1/0/1) #ip pim dr-priority 10 no ip pim dr-priority Use this command to return the DR Priority on the specified interface to its default value. Format Mode no ip pim dr-priority Interface Config ip pim join-prune-interval Use this command to configure the frequency of PIM Join/Prune messages on a specified interface. The join/prune interval is specified in seconds. The seconds argument can be configured as a value from 0 to 18000 seconds. Note: This command takes effect only when PIM-SM is configured as the PIM mode. Default Format Mode 60 ip pim join-prune-interval seconds Interface Config Command example: (NETGEAR) (Interface 1/0/1) #ip pim join-prune-interval 90 IP Multicast Commands 1028 CLI Command Reference Manual