Netgear XSM4324S CLI Manual Software Version 12.x - Page 30
standby, slot for stack configuration, The Standby Management Unit cannot be the current Management
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default Format Mode None movemanagement fromunit tounit Stack Global Config standby Use this command to configure a unit as a Standby Management Unit (STBY). The unit number is the unit number that must become the Standby Management Unit. The unit number must be a valid unit number. Default Format Mode None standby unit number Stack Global Config Note: The Standby Management Unit cannot be the current Management Unit. The Standby unit must be a management-capable unit. no standby Use this command to let the switch run the auto Standby Management Unit. Format Mode no standby Stack Global Config slot (for stack configuration) Use this command to configure a slot in the system. The unit/slot is the slot identifier of the slot. The cardindex is the index into the database of the supported card types, indicating the type of the card that is being preconfigured in the specified slot. The cardindex is a 32-bit integer. If a card is present in the slot that is unconfigured, the configured information is deleted and the slot is reconfigured with default information for the card. Default Format Mode None slot unit/slot cardindex Global Config Stacking Commands 30 CLI Command Reference Manual