Netgear XSM4324S CLI Manual Software Version 12.x - Page 699
Virtual Router Redundancy Protocol Commands
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 699 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ip vlan This command displays the VLAN routing information for all VLANs with routing enabled. Format Modes show ip vlan Privileged EXEC User EXEC Term Definition MAC Address used The MAC Address associated with the internal bridge-router interface (IBRI). The same MAC by Routing VLANs Address is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information. VLAN ID The identifier of the VLAN. Logical Interface The logical unit/slot/port associated with the VLAN routing interface. IP Address The IP address associated with this VLAN. Subnet Mask The subnet mask that is associated with this VLAN. Virtual Router Redundancy Protocol Commands This section describes the commands you use to view and configure Virtual Router Redundancy Protocol (VRRP) and to view VRRP status information. VRRP helps provide failover and load balancing when you configure two devices as a VRRP pair. ip vrrp (Global Config) Use this command in Global Config mode to enable the administrative mode of VRRP on the router. Default Format Mode none ip vrrp Global Config Routing Commands 699 CLI Command Reference Manual