Netgear XSM4324S CLI Manual Software Version 12.x - Page 42
show stack-port diag, the statistics and counters for RPC, transport, CPU
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show stack-port diag Note: This command is intended only for field application engineers (FAEs) and developers. Use this command to display front panel stacking diagnostics for each port. An FAE can advise on the necessity to run this command and capture this information. In verbose mode, the statistics and counters for RPC, transport, CPU, and transport RX/TX modules are displayed. Use the following optional keywords to specify the command output: • number. The output displays for a specific unit in the stack. The value for number can be from 1 to 8. • all. The output displays for all units in the stack. Format Mode show stack-port diag [number | all] [verbose] Privileged EXEC Term Unit Interface Diagnostic Entry1 Diagnostic Entry2 Diagnostic Entry3 TBYT TPKT TFCS TERR RBYT RPKT RFCS RFRG RJBR RUND Definition The unit number. The slot and port numbers. 80 character string used for diagnostics. 80 character string used for diagnostics. 80 character string used for diagnostics. Transmitted bytes. Transmitted packets. Transmitted FCS error frame counter. Transmitted error (set by system) counter Received bytes. Received packets. Received FCS error frame counter. Received fragment counter. Received jabber frame counter. Received undersized frame counter. Stacking Commands 42 CLI Command Reference Manual