Netgear XSM4324S CLI Manual Software Version 12.x - Page 1008
Data Center Commands, CLI Command Reference Manual, Con d No-Drop Priorities
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1008 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description Delay Allowance The link delay allowance on the interface, measured in bit times. Peer Configuration Compatible Indicates whether the switch accepted a compatible configuration from a peer switch. Compatible Configuration The number of received configurations that were accepted and processed as valid. This Count number does not include duplicate configurations. Incompatible Configuration Count The number of received configurations that were not accepted from a peer device because they were incompatible. Priority The 802.1p priority value. Received PFC Frames The number of PFC frames that were received by the interface with the associated 802.1p priority. Transmitted PFC Frames The number of PFC frames that were transmitted by the interface with the associated 802.1p priority. Command example: (NETGEAR Switch) #show interface 0/1 priority-flow-control Interface Detail: PFC Configured State: PFC Operational State: Configured Drop Priorities: Operational Drop Priorities: Configured No-Drop Priorities: Operational No-Drop Priorities: Delay Allowance: Peer Configuration Compatible: Compatible Configuration Count: Incompatible Configuration Count: 0/1 Disabled Enabled 2-7 2-7 0-1 0-1 32456 bit times True 3 1 Priority -------0 1 2 3 4 5 6 7 Received PFC Frames 0 0 0 0 0 0 0 0 Transmitted PFC Frames 0 0 0 0 0 0 0 0 Data Center Commands 1008 CLI Command Reference Manual