Netgear XSM4324S CLI Manual Software Version 12.x - Page 1036
show ip pim neighbor
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1036 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Neighbor Count 1 Designated Router 192.168.10.1 Command example: If none of the interfaces are enabled for PIM, the following message is displayed: None of the routing interfaces are enabled for PIM. show ip pim neighbor This command displays PIM neighbors discovered by PIMv2 Hello messages. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. If the interface number is not specified, the command displays the status parameters of all PIM-enabled interfaces. Format Modes show ip pim neighbor [unit/slot/port | vlan vlan-id] Privileged EXEC User EXEC Term Neighbor Address Interface Up Time Expiry Time DR Priority Definition The IP address of the PIM neighbor on an interface. unit/slot/port The time since this neighbor has become active on this interface. Time remaining for the neighbor to expire. The DR Priority configured on this Interface (PIM-SM only). Note: DR Priority is applicable only when sparse-mode configured routers are neighbors. Otherwise, NA is displayed in this field. Command example: (NETGEAR) #show ip pim neighbor 1/0/1 Neighbor Addr Interface Uptime Expiry Time DR (hh:mm:ss) (hh:mm:ss) Priority 192.168.10.2 1/0/1 00:02:55 00:01:15 NA IP Multicast Commands 1036 CLI Command Reference Manual