Netgear XSM4324S CLI Manual Software Version 12.x - Page 286
debug auto-voip, debug clear, debug console, trace H323, SCCP, SIP, OUI packets respectively.
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches debug auto-voip Use this command to enable Auto VoIP debug messages. Use the optional parameters to trace H323, SCCP, SIP, OUI packets respectively. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug auto-voip [H323 | SCCP |SIP | oui] Privileged EXEC no debug auto-voip Use this command to disable Auto VOIP debug messages. Format Mode no debug auto-voip Privileged EXEC debug clear This command disables all previously enabled "debug" traces. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug clear Privileged EXEC debug console This command enables the display of "debug" trace output on the login session in which it is executed. Debug console display must be enabled in order to view any trace output. The output of debug trace commands will appear on all login sessions for which debug console has been enabled. The configuration of this command remains in effect for the life of the login session. The effect of this command is not persistent across resets. Note: To display the debug trace, enable the debug console command. Default Format Mode disabled debug console Privileged EXEC Utility Commands 286 CLI Command Reference Manual