Netgear XSM4324S CLI Manual Software Version 12.x - Page 375
show port status
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition MAC address The MAC address of the port. The format is 6 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. Bit Offset Val The bit offset value. Command example: (NETGEAR switch) #show port description 0/1 Interface...........0/1 ifIndex 1 Description......... MAC address.........00:10:18:82:0C:10 Bit Offset Val......1 show port status This command displays the status for and the state of all or specified networking ports. Format Mode show port status [unit/slot/port | all | lag] Privileged EXEC Term Definition Intf The interface in the unit/slot/port format. Media Type • auto-select. The media type is automatically selected. The preferred media type is displayed. • RJ45. The media type is RJ45. • SFP. The media type is SFP. STP Mode Indicates whether spanning tree mode is enabled or disabled. Physical Mode The port speed and duplex mode. The maximum capability of the port is advertised. If autonegotiation support is enabled, the duplex mode and speed are set through the autonegotiation process. Physical Status The port speed and duplex mode. Link Status Indicates whether the link is up or down. Loop Status Indicates whether a loop was diagnosed. Partner Flow Control Indicates whether flow control at the remote end is enabled or disabled. Switching Commands 375 CLI Command Reference Manual