Netgear XSM4324S CLI Manual Software Version 12.x - Page 586
set mld-plus, set mld, exclude-mrouter-intf
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 586 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Enter the command in Global Config mode to globally apply the setting to all interfaces. Enter the command in VLAN Config mode to apply the setting at interface level. For the VLAN configuration to take effect, you must first enter the set mld exclude-mrouter-intf command and then enter the same command for a specific VLAN. Default Format Mode Enabled set mld exclude-mrouter-intf [vlan-id] Global Config VLAN Config no set mld exclude-mrouter-intf Use this command to let the switch pass unknown multicast data to an mrouter interface. Enter the command in Global Config mode to globally apply the setting to all interfaces. Enter the command in VLAN Config mode to apply the setting at interface level. Format Mode no set mld exclude-mrouter-intf [vlan-id] Global Config VLAN Config set mld-plus This command enables both of the following global MLD Snooping configuration commands: • set mld • set mld exclude-mrouter-intf Default Format Mode Enabled set mld-plus Global Config no set mld-plus This command disables both of the following global MLD Snooping configuration commands: • set mld • set mld exclude-mrouter-intf Format Mode no set mld-plus Global Config Switching Commands 586 CLI Command Reference Manual