Netgear XSM4324S CLI Manual Software Version 12.x - Page 1097
show poe, no poe traps
View all Netgear XSM4324S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1097 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no poe traps Use this command to disable logging the PoE traps. Format Mode no poe traps Global Config show poe Use this command to get global information regarding the PoE status. Format Mode show poe Privileged EXEC User EXEC Term Definition Unit The unit on which PoE module is installed. Firmware Version The firmware version of the PoE controller on the switch. PSE Main Operational Status Indicates the status of the PoE controller: • ON-Indicates that the PoE controller is actively delivering power. • OFF-Indicates that the PoE controller is not delivering power. • FAULTY-Indicates that the PoE controller is not functioning. Power Source The source that provides power (internal power supply or RPS). Total Power The maximum amount of power that can be delivered by this PoE unit. Threshold Power The switch can power up one port, if consumed power is less than this power. That is, the consumed power can be between the total power and threshold power values. The threshold power value is effected by changing the system usage threshold. Total Power Consumed The total amount of power being delivered to all the devices plugged into the switch. Usage Threshold The usage threshold level. Power Management Mode The management mode used by the PoE controller. Traps The configured traps. Command example: (NETGEAR Switch) #show poe Unit 2 Host XCM8948 Firmware Version 1.0.0.2 Power over Ethernet Commands 1097 CLI Command Reference Manual