Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 949
brief, If you specify an interface, the following information also displays.
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 949 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches If you use the brief parameter, the following information displays for all configured IPv6 interfaces. Term Interface IPv6 Operational Mode IPv6 Address/Length Method Definition The interface in unit/slot/port format. Shows whether the mode is enabled or disabled. Shows the IPv6 address and length on interfaces with IPv6 enabled. Indicates how each IP address was assigned. The field contains one of the following values: • DHCP. The address is leased from a DHCP server. • Manual. The address is manually configured. Global addresses with no annotation are assumed to be manually configured. If you specify an interface, the following information also displays. Term Definition Routing Mode Shows whether IPv6 routing is enabled or disabled. IPv6 Enable Mode Shows whether IPv6 is enabled on the interface. Administrative Mode Shows whether the interface administrative mode is enabled or disabled. Bandwidth Shows bandwidth of the interface. Interface Maximum Transmission Unit The MTU size, in bytes. Router Duplicate Address Detection The number of consecutive duplicate address detection probes to transmit. Transmits Address Autoconfigure Mode Shows whether the autoconfigure mode is enabled or disabled. Address DHCP Mode Shows whether the DHCPv6 client is enabled on the interface. IPv6 Hop Limit Unspecified Indicates if the router is configured on this interface to send Router Advertisements with unspecified (0) as the Current Hop Limit value. Router Advertisement NS Interval The interval, in milliseconds, between router advertisements for advertised neighbor solicitations. Router Advertisement Lifetime Shows the router lifetime value of the interface in router advertisements. Router Advertisement Reachable Time The amount of time, in milliseconds, to consider a neighbor reachable after neighbor discovery confirmation. Router Advertisement Interval The frequency, in seconds, that router advertisements are sent. Router Advertisement Managed Config Flag Shows whether the managed configuration flag is set (enabled) for router advertisements on this interface. Router Advertisement Other Config Shows whether the other configuration flag is set (enabled) for router Flag advertisements on this interface. IPv6 Commands 949