Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 810
trapflags Captive Portal Config Mode, authentication timeout
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 810 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches no snmp-server enable traps captive-portal This command globally disables all the captive portal traps. Format Mode no snmp-server enable traps captive-portal Global Config trapflags (Captive Portal Config Mode) This command enables captive portal SNMP traps. If no parameters are specified, then all traps are enabled. SNMP traps can also be enabled individually by supplying the optional parameters. The client-auth-failure option allows the SNMP agent to send a trap when a client attempts to authenticate with a captive portal but is unsuccessful. The client-connect option allows the SNMP agent to send a trap when a client authenticates with and connects to a captive portal. The client-db-full option allows the SNMP agent to send a trap each time an entry cannot be added to the client database because it is full. The client-disconnect option allows the SNMP agent to send a trap when a client disconnects from a captive portal. Default Format Mode Disabled trapflags [client-auth-failure | client-connect | client-db-full | client-disconnect] Captive Portal Config no trapflags This command disables all captive portal SNMP traps when no parameters are specified. The optional parameters specify individual traps to disable. Format Mode no trapflags [client-auth-failure | client-connect | client-db-full | client-disconnect] Captive Portal Config authentication timeout This command configures the authentication time-out. If the captive portal user does not enter valid credentials within this time limit, the authentication page needs to be served again in order for the client to gain access to the network. The seconds variable is the authentication time-out and is a number in the range of 60-600 seconds. Captive Portal Commands 810