Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 50
show slot, show stack-status, clear
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches show slot Use this command to display information about all the slots in the system or about a specific slot. Format Mode show slot [unit/slot] User EXEC Privileged EXEC Term Slot Slot Status Admin State Power State Configured Card Model Identifier Pluggable Power Down Definition The slot identifier in the unit/slot format. The slot is empty, full, or has encountered an error The slot administrative mode is enabled or disabled. The slot power mode is enabled or disabled. The model identifier of the card preconfigured in the slot. The model identifier is a 32-character field used to identify a card. Cards are pluggable or non-pluggable in the slot. Indicates whether the slot can be powered down. If you supply a value for unit/slot, the following additional information displays: Term Inserted Card Model Identifier Inserted Card Description Configured Card Description Definition The model identifier of the card inserted in the slot. The model identifier is a 32-character field used to identify a card. This field is displayed only if the slot is populated. The card description. This field is displayed only if the slot is populated. The card description of the card preconfigured in the slot. show stack-status Use this command to display the stack unit's received heartbeat message timings and the dropped or lost statistics for the specified unit. Use the following optional keywords to specify the command output: • number. The output displays for a specific unit in the stack. The value for number can be from 1 to 8. • all. The output displays for all units in the stack. Use the optional keyword clear to remove the statistics of the stack heartbeat message. Stacking Commands 50