Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 326

M5300, M6100, and M7100 Series ProSAFE Managed Switches Term Definition Unit Unit Index of the chassis member. Green Ethernet Features supported List of Green Features supported on the given unit which could be one or more of the following: Energy-Detect (Energy Detect), EEE (Energy Efficient Ethernet), LPI-History (EEE Low Power Idle History), LLDP-Cap-Exchg (EEE LLDP Capability Exchange), Pwr-Usg-Est (Power Usage Estimates). Energy Detect Energy-detect Config Energy-detect Admin mode is enabled or disabled Energy-detect Opr Energy detect mode is currently active or inactive. The energy detect mode may be administratively enabled, but the operational status may be inactive. EEE EEE Config EEE Admin Mode is enabled or disabled. Command example: The following example shows that the system supports all green Ethernet features: (NETGEAR Switch) #show green-mode Current Power Consumption (mW 11172 Power Saving 10 Cumulative Energy Saving /Chassis (W * H)... 10 Unit Green Ethernet Features Supported 1 Energy-Detect EEE LPI-History LLDP-Cap-Exchg Pwr-Usg-Est Interface Energy-Detect Config Opr 1/0/1 Enabled Active 1/0/2 Enabled Active 1/0/3 Enabled Active 1/0/4 Enabled Active 1/0/5 Enabled Active 1/0/6 Enabled Active 1/0/7 Enabled Active --More-- or (q)uit Short-Reach-Config Auto Forced Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Short-Reach Opr ----------Inactive Inactive Inactive Inactive Inactive Inactive Inactive EEE Config -------Enabled Enabled Enabled Enabled Enabled Enabled Enabled Utility Commands 326