Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 1113
show ip mcast interface, show ip mcast mroute, is a number in the range of 1-4093.
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1113 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches Term Group Ip Mask Definition The group IP address. The group IP mask. show ip mcast interface This command displays the multicast information for the specified interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. Format Modes show ip mcast interface {unit/slot/port | vlan vlan-id} Privileged EXEC User EXEC Term Interface TTL Definition unit/slot/port The time-to-live value for this interface. show ip mcast mroute This command displays a summary or all the details of the multicast table. Format Modes show ip mcast mroute {detail | summary} Privileged EXEC User EXEC If you use the detail parameter, the command displays the following fields. Term Source IP Addr Group IP Addr Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. IP Multicast Commands 1113