Netgear XCM89UP Command Line Interface CLI User Manual Software Version 11.x - Page 172
boot autoinstall, boot host retrycount, boot host dhcp
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
M5300, M6100, and M7100 Series ProSAFE Managed Switches boot autoinstall Use this command to operationally start or stop the AutoInstall process on the switch. The command is non-persistent and is not saved in the startup or running configuration file. Default Format Mode stop boot autoinstall {start | stop} Privileged EXEC boot host retrycount Use this command to set the number of attempts to download a configuration file from the TFTP server. The number argument is a number in the range 1-3. Default Format Mode 3 boot host retrycount number Privileged EXEC no boot host retrycount Use this command to set the number of attempts to download a configuration file to the default value. Format Mode no boot host retrycount Privileged EXEC boot host dhcp Use this command to enable AutoInstall on the switch for the next reboot cycle. The command does not change the current behavior of AutoInstall and saves the command to NVRAM. Default Format Mode enabled boot host dhcp Privileged EXEC no boot host dhcp Use this command to disable AutoInstall for the next reboot cycle. Format Mode no boot host dhcp Privileged EXEC Utility Commands 172